Portfolio
We supply the following commodity and engineering plastics of many leading manufacturers – product sheet as PDF
- PPE/HIPS
- Polyphenylenether + High Impact Polystyrol
- gefüllt und ungefüllt, mit und ohne Flammschutz, halogenfrei, hoch schlagzäh, alle gängigen Trinkwasserzulassungen, FDA, Medizin, hitzestabilisiert, diverse Farben
This blend of Polyphenylene Ether and High Impact Polystyrene is an amorphous material, which is, apart from its good electrical properties, particularly characterized by hydrolytic stability.
- Low water absorption
- High dimensional stability
- KTW (German guideline for plastics in drinking water)
- Drinking water sector
- Water wheels
- Pumps
- PA6
- Polyamide 6
- Portfolio — with and without flame retardancy, filled or unfilled, high impact-resistance, halogen free, heat stabilized, improved wear friction, heat conductive, electrically conductive, laser additives
Polyamide 6 is a semi-crystalline material, which, due to its high stability, thermal resistance and chemical resistance, is particularly suitable for functional components.
- High dimensional stability under heat
- High stiffness
- High stability
- High abrasion resistance
- Good electrical insulation properties
- Electrical components
- Water wheels
- Drinking-Water Applications
- PA66
- Polyamide 66
- Portfolio — with and without flame retardancy, filled and unfilled, high impact-resistance, heat stabilized, hydrolysis stabilized, improved wear friction , electrically conductive, laser additives
Polyamide 66 is similar in properties to Polyamide 6 but possesses an even higher dimensional stability under heat as well as improved stability values.
- Chemical resistance
- High water absorption
- High energy capacity
- High resistance to abrasion
- Engine compartment
- Friction bearings
- Gearwheels
- Caster
- POM
- Polyacetal
- Portfolio — homo- and copolymers, filled and unfilled, high impact strength, improved wear friction, FDA, low abrasion, low emission
Polyacetal is a semi-crystalline material which is marked by good gliding properties, chemical resistance and excellent elastic properties.
- High stability and stiffness
- High recovery properties
- Low water absorption
- Good gliding behavior
- Friction bearings
- Gearwheels
- Fuel tanks
- Sanitary facilities
- PC
- Polycarbonate
- Portfolio — blends and copolymers, with and without flame-retardancy, filled and unfilled, FDA, medical, UV-stabilized, aerospace and railway licensed, high impact strength, hydrolysis stabilized, halogen-free, heat stabilized, electrically conductive, antistatic, optical grades, transparency, translucent and in various colors
Polycarbonate is an amorphous material and possesses good mechanical, optical and electrical properties.
- Very high impact strength
- Good stability
- Good toughness
- Low hydrolytic stability
- Dimensional stability
- Light conductors
- Medical technology
- Displays
- Headlights
- PBT
- Polybutylene Terephthalat
- Portfolio — blends and copolymers, with and without flame-retardancy, halogen free, filled and unfilled, FDA, medical, UV-stabilized, high impact strength, hydrolysis stabilized, low warpage, heat stabilized, improved wear friction, various colors
Polybutylene Terephthalat is a semi-crystalline material, which exhibits high dimensional stability as well as high stiffness and stability.
- Good stress cracking resistance
- Good electrical properties
- High toughness
- Ventilation ducts
- Switches
- Connectors
- Sockets
- ABS
- Acrylonitrile-Butadiene-Styrene
- Portfolio — filled and unfilled, with and without flame-retardancy, high impact strength, heat stabilized, improved wear friction, antistatic, FDA, special electro-plating grades, low emission, EMI/RFI isolation due to stainless steel fiber filling, variety of colors
Acrylonitrile-Butadiene-Styrene is an amorphous material; its particular properties are good impact strength, ductility and good dimensional stability.
- High impact strength
- Good paintability
- Chemical resistance
- Low warpage
- Door knobs
- Storage trays
- Casings
- PBT/ASA
- Polybutylene Terephthalat / Acrylonitrile-Styrene-Acrylic-Ester
- Portfolio — filled, without flame-retardancy, heat stabilized, highly dimensional stable, low warpage, with laser additives, various colors
This blend of Polybutylene Terephthalat and Acrylonitrile-Styrene-Acrylic-Ester combines the respective positive properties of the plastics: the good dimensional accuracy of the PBT and the high resistance to weathering of the ASA-group in particular.
- Excellent stiffness
- Very good chemical resistance
- Good hydrolytic features
- Electrical applications in industrial and home appliances
- Functional parts with demanded low warpage
- Connectors
- PPE/PA66
- Polyphenylene Ether / Polyamide 66
- Portfolio — filled and unfilled, with and without flame-retardancy, halogen free, high impact strength, conductive and online paintability, various colors
This blend of Polyphenylene Ether with Polyamide 66 is characterized by good heat stability, stiffness as well as very good flow behavior and it can be painted without problems.
- Excellent paintability
- Very good wear resistance
- Excellent chemical resistance
- Automotive & commercial vehicle applications (i.e. side mirror flaps)
- Highly stressed machine components
- Casings
- PC/ABS
- Polycarbonate / Acrylonitrile-Butadiene-Styrene
- Portfolio — with and without flame-retardancy, halogen free, filled and unfilled, high impact strength, electro-plating grades, FDA, medical, UV-stabilized, hydrolysis stabilized, halogen free, improved wear friction, low emission, various colors
This blend of Polycarbonate with Acrylonitrile-Butadiene-Styrene unites the good mechanical properties and dimensional stability under heat of the PC with the good process ability of the ABS. PC/ABS is particularly suitable for electro-plating operations.
- Good paintability
- Electro-plating proficient
- High dimensional stability
- Casings
- Trims
- Switches
- SAN
- Styrene-Acrylonitrile
- Portfolio — unfilled, without flame retardancy, transparent, dimensionally stable, improved chemical resistance
Styrene-Acrylonitrile is an amorphous, crystal-clear material with good chemical resistance and improved notched impact strength.
- Good stability (higher than PS)
- Higher chemical and thermal resistance than PS
- Low creeping tendency
- Containers
- Casings
- Covers
- PSU
- Polysulfone
- Portfolio — filled and unfilled, inherent flame retardancy, halogen free, high-temperature resistant, hydrolysis resistance, transparent (amber colored) and black
Polysulfones are extremely resistant to heat; these amorphous thermoplastics feature in particular high continuous operating temperatures.
- Good dimensional accuracy
- High stiffness and stability
- Good electrical insulation properties
- Medical technology
- Household goods
- Pumps
- Water wheels
- ASA
- Acrylonitrile-Styrene-Acrylic-Ester
- Portfolio — unfilled grades, with and without flame-retardancy, halogen free, high impact strength, antistatic, heat stabilized, UV-stabilized, FDA, various colors
Acrylonitrile-Styrene-Acrylic-Ester is an amorphous material, which features in particular good resistance to UV-radiation and to weathering.
- High ageing resistance
- High resistance to UV-radiation
- High dimensional stability
- Window frames
- Automotive industry: exterior & interior
- Casings
- PMMA
- Polymethylmethacrylate
- Portfolio — unfilled, without flame-retardancy, UV-stabilized, high scratch resistance, transparent and diffused colors
Due to its high transparency the amorphous material Polymethyl Methacrylate is used for clear parts.
- Good weathering resistance
- High scratch resistance
- Viscous
- Light conductors
- Optics
- Displays
- PESU
- Polyether Sulfone
- Portfolio — filled and unfilled, inherent flame-retardant, halogen free, dimensionally stable, improved impact strength compared to PSU, high-temperature resistant, hydrolysis resistant, transparent (amber-colored) and black
Polyether Sulfones differ from PSU in higher water absorption and better dimensional stability under heat. They also show less smoke formation in their fire behavior.
- High toughness
- Dimensionally stable at high temperatures
- Hydrolytical stable
- Home appliances
- Automotive industry (i.e. reflectors)
- Mechanical engineering (i.e. viewing panels)
- PPS
- Polyphenylene Sulfide
- Portfolio — filled, as well long glass fiber filling, with flame-retardancy, halogen free, high-temperature resistant and extremely dimensionally stable, high impact strength, hydrolysis resistant, drinking water licensed, uncolored and black
Polyphenylene Sulfide is a semi-crystalline material, which is characterized by very high dimensional stability under heat and very good chemical resistance.
- Low water absorption
- Inherent flame-retardant
- Very good electrical properties (isolator)
- Low creeping tendency
- Highly stressed components in electrical and automobile industry
- Casing applications
- Functional parts with high thermal demand
- PS
- Polystyrene
- Portfolio — unfilled, high impact strength, FDA, transparent and various colors
Polystyrene is an amorphous, clear material, which is characterized by high stiffness and stability.
- Easy to process
- Low water absorption
- Low shrinkage
- Low toughness
- Wrappings
- Covers
- Transparent panels
- HDPE
- High Density Polyethylene
- Portfolio — unfilled, opaque color
Polyethylene is a semi-crystalline material, which characteristics are a good processibility and a good chemical resistance.
- Easy to process
- Low water absorption
- Low density
- Bottles
- Packaging
- Containers
- PBT/PC
- Polycarbonate/Polybutylene Terephthalat
- Portfolio — filled and unfilled, with and without flame-retardancy, halogen free, heat stabilized, high impact strength, UV-stabilized, various colors
The high-quality blend of polybutylene terephthalate and polycarbonate combines the excellent chemical properties of the semi-crystalline PBT in combination with the excellent toughness, paintability and dimensional stability of the amorphous PC.
- High toughness
- Very good paintability
- Very good chemical resistance
- Automotive and commercial vehicle parts
- Casings for power tools
- Electric toothbrush
- PP
- Polypropylene
- Portfolio — filled and unfilled, without flame-retardancy, homo- and copolymer, high crystalline grades, FDA, uncolored and black
Polypropylene is a semi-crystalline, universal commodity material with a well balanced property profile.
- Good chemical resistance
- Low density
- Good stability
- Ventilation ducts
- Transport boxes
- Controls and instruments
- Containers
- PA12
- Polyamide 12
- Portfolio — filled and unfilled, with and without flame-retardancy, heat stabilized, antistatic, high impact strength
Polyamide 12 is a semi-crystalline material, which is characterized by high stability and impact strength. Contrary to PA6 or PA66, PA12 has lower water absorption and thus exhibits high dimensional stability.
- Low water absorption
- Good stress cracking resistance
- High resistance to abrasion
- High dimensional stability
- Transmission components
- Damping elements
- Friction bearings
- Valves
- PA4.6
- Polyamide 4.6
- Portfolio — filled and unfilled, with and without flame-retardancy, high-temperature resistance, high impact strength, improved wear friction
Polyamide 4.6 exhibits excellent resistance to wearing and friction as well as highest mechanical properties.
- High temperature stability
- High stiffness
- High stability
- Low water absorption
- Automobile industry
- Electrical industry
- Gearwheels
- Metal substitution
- PA6/66
- Polyamide 6 / Polyamide 66
- Portfolio — filled and unfilled, with and without flame-retardancy, halogen free, heat stabilized, high impact strength
This is a copolyamide built from Polyamide 6 and Polyamide 66 which as blend reinforces the good gliding properties of the two polymers.
- Very good gliding properties
- Low wear
- High impact strength
- Electrical industry
- Automotive industry
- Casings, covers
- Functional parts with high demand and good wear and friction properties
- PA6/6T
- Polyamide 6/6T
- Portfolio — filled and unfilled, high-temperature resistant, very dimensionally stable, high impact strength
Polyamide 6/6T is a technical high performance thermoplastic, which exhibits particularly high stability and stiffness; another feature is its high continuous operating temperature.
- Improved heat stability
- Stable mechanical characteristics with the interaction of ambient humidity
- High impact strength
- Automotive industry
- Electronic industry
- EVA
- Copolymer of ethylene and vinyl acetate
- Portfolio — Unfilled, uncolored, UV-stabilized, ductile at low temperatures, improved chemical resistance
A copolymer of ethylene and vinyl acetate combines good processibilty and flexibility of polyethylene and the exepctional chemical resistance and UV-stability of vinyl acetate
- Very flexible
- UV-stability
- Good chemical resistance
- Connectors
- Damping buffers
- Plugs
- PPA
- Polyphthalamide
- Portfolio — filled, as well long glass fiber filling, with and without flame-retardancy, halogen free, high-temperature resistant, high impact strength, improved wear friction, uncolored and black
Polyphthalamide is a high performance material which is characterized by its high stability and resistance to corrosion. Due to its lighter weight it is being used as a metal substitute
- Low water absorption
- High temperature resistance
- Low creeping tendency
- Highly stressed components in electrical and automobile industry
- Casing applications
- Functional parts with high thermal demand
- TPE
- Thermoplastic Elastomers
- Portfolio — unfilled, without flame-retardancy, 40 shore D, uncolored
Thermoplastic Elastomers are plastics, which can be processed thermoplastically and exhibit rubberlike performance characteristics.
- Good adhesive qualities on other materials
- Softtouch
- Easy to process
- Controls and instruments
- Covers
- Automotive interiors
- TPU
- Thermoplastic Urethanes
- Portfolio — unfilled, without flame-retardancy, hydrolysis resistant, improved chemical resistance, UV-stabilized, available as uncolored
Thermoplastic Urethanes are plastics that behave like classical elastomers at room temperature; however, under heat they can be thermoplastically deformed.
- High abrasion resistance
- Hydrolytic stability
- Good damping power
- Good recovery properties
- Thoothed belts
- Switches
- Seals
- Sole of a shoe
- MABS
- Methyl Methacrylate Acrylonitrile-Butadiene-Styrene
- Portfolio — unfilled, transparent, scratch resistant, high impact strength, dimensionally stable
Methyl Methacrylate Acrylonitrile-Butadiene-Styrene is a transparent, amorphous thermoplastic which is characterized by the typical ABS properties.
- High stiffness and toughness
- High impact strength
- Good transparency
- Cosmetic packaging
- Vacuum cleaner casing
- Toys
- PEEK
- Polyetheretherketone
- Portfolio — filled, without flame-retardancy, improved wear friction, high-temperature resistant, hydrolysis resistant, electrically conductive, high impact strength, uncolored and black
Polyetheretherketone is a semi-crystalline material with a very high dimensional stability under heat, which is also characterized by excellent chemical resistance.
- Temperature stability up to 300°C
- High hydrolytic stability
- Inherent flame-retardant
- Radiation resistance
- Medical technology
- Aerospace industry
- Electrical engineering
- PC/SAN
- Polycarbonate / Styrol-Acrylnitril
- Portfolio — Filled, without flame-retardancy, highly dimensional stable, high impact strength, heat stabilized, UV-stabilized
The combination of Polycarbonate and Styrol-Acrylnitril in this blend contributes to a good toughness with improved stiffness, wear stability and chemical resistance.
- Good wear and friction properties
- Good paintability
- Improved flow
- Automotive applications
- Switches & connectors
- Casings
- LDPE
- Low Density Polyethylene
- Portfolio — Unfilled, opaque color
Polyethylene is a semi-crystalline material, which characteristics are a good processibility and a good chemical resistance.
- Easy to process
- Low water absorption
- Low density
- Bottles
- Packaging
- Containers